Authentic Graco Ultra Max II 495 Lo-Boy Sprayer Parts
Professionals who live and die by production speed know that a down pump can cost thousands in lost billable hours. That’s why pros across the Gulf Coast rely on SprayersAndParts.com for factory-approved Graco Ultra Max II 495 Lo-Boy Sprayer components. Our website stocks everything from graco cordless paint sprayer parts for TrueCoat handhelds to full pump rebuilds for the big 695 Graco paint sprayer.
Why Choose Genuine Graco Ultra Max II 495 Components?
- Exact-spec machining. Chromex piston rods and stainless cylinders are ground to ±0.001 in, holding a rock-steady 3300 PSI fan pattern.
- SmartControl 3.0 electronics. Digital pressure management keeps dead-band below 1 %, eliminating zebra stripes on fine-finish trim.
- MaxPower brushless motor. A 1.2 HP DC motor draws just 6.5 A yet delivers 0.60 GPM through a 0.025-in tip all day, every day.
- Warranty intact. Only by Using genuine Graco airless parts.
Core Specs at a Glance
| Max Working Pressure | 3300 PSI / 228 bar |
|---|---|
| Max Flow Rate | 0.60 GPM / 2.3 L min-1 |
| Max Tip (single gun) | 0.025 in RAC X LP/LTX |
| Recommended Generator | 3750 W minimum |
| Weight | 64 lb Lo-Boy frame |
Translation: the 495 Lo-Boy atomizes block-fill primer before lunch, yet fits under van shelving with room to spare.
Inventory Smarter with Cross-Fit Parts
- Graco 490 Parts: ProConnect pumps and V-Max packings slide into a 495 frame in an emergency, so one seal kit covers two sprayers.
- 695 Graco Paint Sprayer: RAC X guards, BlueMax II hoses, and Contractor PC guns interchange use your bulk consumable discounts across the fleet.
- Graco Fine Finish Guns: Contractor PC FF and RAC X FF LP tips drop straight onto the 495 for cabinet-grade finishes with half the overspray.
- Graco Paint Sprayer Guard: 246215 RAC X HandTite guard fits every 7/8-G threaded gun in your trailer swap without tools in seconds.
Essential Upgrades for Faster Finishes
Every listing shows dimensions, material grades, and pressure ratings so you can confidently match parts across rigs.
- BlueMax II whip hose (⅛-in x 6 ft): cuts gun weight by 50 % for ceiling work and trims wrist fatigue.
- RAC X LP tips (208-425): patented SmartTip geometry sprays the same fan width at half pressure doubling tip life.
- Fine Finish Low-Pressure tips: softer fan pattern reduces prep by 30 % on doors and millwork.
- Graco Machine Parts Kit: pre-boxed fasteners, O-rings, and filters labeled for 490/495/595 grab and go.
Five Pro Tips to Triple Pump Life
- Log gallons. SmartControl tracks pump hours—swap packings every 450 gal to prevent rod scoring.
- Wet-cup nightly. A squeeze of TSL costs pennies versus a $325 piston rod.
- Rotate tips. Flip or change after every 100 gal; worn orifices spike pressure and cook seals.
- Keep a spare graco 490 parts pump. ProConnect lets you swap in 60 seconds on the job zero rental fees.
- Color-code bins. Separate graco fine finish guns hardware from high-pressure fittings so 6 a.m. mobilization isn’t a scavenger hunt.
Frequently Asked Questions
What generator size do I need?
Graco recommends a 3.75 kW generator to handle start-up surge and maintain 3300 PSI under load.
Does a RAC X graco paint sprayer guard fit older guns?
Yes—Model 246215 fits any 7/8-G threaded gun, including legacy Silver and Contractor models.
Can I spray solvent-borne lacquer?
Yes—use an FF LP 210 tip at 1200 PSI and flush with Pump Armor nightly to protect packings.
Ready to Slash Downtime?
Add authentic Graco Ultra Max II 495 Lo-Boy Sprayer seals, filters, and pumps to your cart. Toss in graco cordless paint sprayer parts, a fresh RAC X guard, and fine finish guns to turn procurement friction into flawless finish work.