Graco 246425 Short Manifold 30 Mesh Filter (Gray)
OEM Graco 246425 Short Manifold 30-Mesh (Gray) filter for reliable debris capture and smoother spray with heavier coatings. Quick to swap, protects pump and reduces tip clogs.
- Type: Short Easy Out manifold filter
- Mesh/Color: 30-mesh / Gray
- Fits: ST, STX, 390 / 390 PC, Ultra 395, Ultra 495, Ultra 595
- Best for: Heavy latex, block fillers, elastomerics
- Benefit: Fewer clogs, better pattern, longer pump life
Overview & Key Benefits of Graco 246425 Short Manifold 30 Mesh Filter (Gray)
Compatible Machines
This OEM Graco 246425 filter is used on select small/medium contractor sprayers. If your sprayer uses the short Easy Out manifold filter and follows Graco’s gray = 30-mesh color code, it likely matches this part.
- Graco ST Series airless sprayers
- Graco STX Series airless sprayers
- Graco 390 / 390 PC
- Graco Ultra 395
- Graco Ultra 495
- Graco Ultra 595
What It Is & Why It Matters
Graco 246425 Short Manifold 30 Mesh Filter (Gray) is a genuine Easy Out pump manifold filter designed to capture larger debris before it reaches the hose and gun. The 30-mesh rating and gray color identify it as the coarse option suited to higher-viscosity materials (e.g., heavy latex, block fillers, elastomerics). Using the correct mesh helps maintain pattern quality, reduces tip clogging, and extends pump and valve life.
Specifications
| Part Number | 246425 |
|---|---|
| Type | Easy Out short pump manifold filter |
| Mesh / Color | 30-mesh / Gray |
| Use Case | Coarser filtration for higher-build or heavy-bodied coatings; helps reduce tip clogs |
| Compatibility Note | For sprayers that take the short Easy Out manifold filter (not the long style) |
| What’s Included | 1 × OEM Graco 246425 filter |
Pro Tips
- Match filter mesh to material: 30-mesh (gray) for heavier coatings; finer meshes for thinner paints.
- Inspect and rinse the filter regularly to maintain flow and a consistent spray fan.
- If you experience frequent tip clogs with this filter, consider stepping up to a finer mesh - provided your sprayer/specs allow it.
Frequently Asked Questions
It is the short Easy Out manifold filter. If your sprayer specifies the long version, select the correct long-style part instead.
Use 30-mesh for heavier-bodied coatings (e.g., heavy latex, block fillers, elastomerics). It allows higher flow while still catching larger debris.
Yes—these models commonly use the short Easy Out manifold filter. Always verify your sprayer’s manual or existing filter color/mesh before ordering.
Inspect and clean after each use. Replace when the mesh is crushed, torn, or permanently clogged, or if you notice persistent pressure drops or pattern issues.
