Get the Right Graco Ultra 495 Lo-Boy Electric Airless Sprayer Components for Peak Performance
When uptime, finish quality, and bid margins are on the line, pros count on Graco Ultra 495 Lo-Boy Electric Airless Sprayer. At SprayersAndParts.com, we stock every OEM rod, seal, and circuit board you need that turns “shopping” into “spraying.” Our catalog ranges from a single graco magnum x7 replacement spray gun to full graco spray pump parts kits, so you can spec, source, and ship in one friction-free stop.
Why the 495 Lo-Boy Stays a Job-Site Favorite
- Pro-size output: A 1.2 hp brushless DC motor drives up to 0.54 gpm—ideal for single- or two-gun repaint crews .
- Full-range pressure: Spray anything from stains at 50 psi to elastomerics at 3,300 psi thanks to Low/High pressure modes.
- SmartControl™ digital display: Constantly adjusts motor speed for a flat fan and ±1 % pressure accuracy, even on 200 ft hose runs.
- ProConnect™ pump swap: Drop in a fresh lower in under one minute—no wrenches—slashing downtime on multi-day jobs.
- Contractor PC gun included: The lightest trigger in its class cuts fatigue 50 % and accepts every RAC X LP/FFLP tip family.
Core Performance Specs
- Max working pressure: 3,300 psi / 228 bar
- Max tip size (1 gun): 0.027 in (RAC X)
- Max flow rate: 0.54 gpm / 2.0 L min-1
- Motor: 1.2 hp brushless DC—maintenance-free and generator-friendly.
- Recommended production: 30–75 gal per week for residential & light commercial crews.
One Parts Drawer, Multiple Rigs: Compatibility Highlights
The 495 PC shares DNA with several other Graco stalwarts, letting you stretch inventory dollars:
- Ultra 395 PC & 595 PC—identical V-Max Blue™ packings and pump housings; our graco spray pump parts kit services all three models .
- Magnum X7 & LTS 17—swap guns easily with a graco magnum x7 replacement spray gun; RAC X guards thread straight on .
- TrueCoat 360—Low-pressure LP 515 tips fit the same blue guard, perfect for trim after rolling walls.
- Air Pro spray guns—feed HVLP fine-finish jobs via a 3/16-in fluid whip while keeping the 495 as your pressure pot.
- Fine Finish Guns—Graco FF LP and Contractor PC Compact share the same cartridge, so one spare keeps both guns field-ready.
Must-Have Accessories for Faster, Cleaner Jobs
- Graco Fine Finish Guns: Pair an FFLP 210 tip for cabinets or an LP 517 for walls—up to 50 % less overspray.
- 12- to 36-in extensions: Reach soffits and stairwells while keeping the gun upright; perfect for graco spray gun accessories color-coded bins.
- BlueMax II hose sets: Lightweight, anti-static, and rated to 3,300 psi—no pressure drop on 200-ft runs.
- Air Pro guns: Snap an HVLP cup on the same compressor line for varnish touch-ups without cleaning the 495 pump.
- TrueCoat 360 replacement parts: Keep handhelds on the truck for tight closets or punch-list spots.
Five Reasons OEM 495 Parts Outperform Aftermarket Knock-Offs
- Precision machining: Chrome rods ground to ±0.001 in hold 3,300 psi without creep—aftermarket rods often glaze at 2,700 psi.
- Chemical-tested packings: Viton®, UHMW-PE, and leather seals survive 1,000-hour immersion in solvent, latex, and alkyd blends.
- QuikAccess™ intake valve: Faster flushing, less solvent, zero tool time.
- Warranty intact: Only OEM parts keep the pump, drive, and SmartControl board under Graco’s 12-month coverage.
- Higher resale: Fleet sprayers logged in BlueLink™ with OEM rebuilds fetch up to 17 % more at auction.
Pro Tips for 10,000-Hour Reliability
- Daily: Flush with FastFlush™ for 45 s, add three drops of TSL oil.
- Every 500 gal: Replace the 60-mesh manifold filter and clean the inlet strainer.
- Every 1,000 h: Install a ProConnect™ pump lower—one nut, one minute—and log the change in BlueLink.
- Every 2 years: Swap the SmartControl pressure sensor to maintain ±1 % fan uniformity.
- Trouble-free winterization: Run Pump Armor® until green solution appears at the gun; store at 40 °F+.
Frequently Asked Questions
- Can the 495 Lo-Boy power two guns?
- Yes. With 0.54 gpm you can run two 0.015 tips at 2,000 psi for primers or stains—ideal for stairwells or duplex exteriors.
- Is the Lo-Boy weaker than the Hi-Boy?
- Performance is identical; only the frame height changes. The Lo-Boy fits under truck toppers and slides into vans easier.
- Will my graco air pro spray gun work on the 495?
- Absolutely. Use a 3/16-in fluid whip and keep the regulator at 20–30 psi. The pump acts like a pressure pot for fine-finish work.
- What tip should I use for interior walls?
- Start with an LP 517 for latex. Step down to an FFLP 210 for doors, or up to an LP 521 for heavier acrylics.
Boost Productivity—Order OEM 495 Parts Today
Ready to keep crews earning and bids on schedule? Add genuine Graco Ultra 495 Lo-Boy Electric Airless Sprayer parts including graco fine finish guns, graco spray gun accessories, and graco truecoat 360 replacement parts—to your cart now and proven compatibility across the 395-595 family, SprayersAndParts turns downtime into go-time every single job.