Graco 17E586 Ultra Max II 1095 IronMan Series Electric Airless Sprayer
$7,417.50
$10,750.00
Save 31%
In Stock
Graco 17E586 Ultra Max II 1095 IronMan is a complete heavy-duty sprayer built for durability and big jobs. Quick specs below for fast decisions.
- Max Flow: ~1.20 GPM
- Max Pressure: 3300 psi
- Max Tip: 0.035" (1-gun) • ~0.027" (2-gun)
- Pump: Endurance Vortex MaxLife Extreme
- Control: SmartControl 4.0 + BlueLink
- Hose Run: up to ~400 ft
- Ideal For: large residential & commercial work
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Features
Graco 17E586 Ultra Max II 1095 IronMan Series Electric Airless Sprayer is a heavy-duty, hi-boy cart sprayer designed for large residential and commercial projects. The IronMan trim emphasizes durability and uptime with rugged wheels, crush-proof inlet strainer, and the Endurance Vortex MaxLife Extreme pump family, paired with SmartControl 4.0 pressure management and BlueLink connectivity for job tracking.
Compatible Machines
- This product is a complete electric airless sprayer (a “machine”). It does not fit into other machines.
Compatible Parts & Accessories (for 17E586 / 1095 platform)
- Endurance Vortex MaxLife Extreme Pump family (1095 platform)
- Contractor PC / RAC X–compatible spray guns
- RAC X tips (e.g., LP/FF/HD) and RAC X tip guard
- BlueMax II airless hoses (1/4" and 3/8"), whip hoses, swivels
- Easy-Out manifold & gun filters (mesh as material requires)
- Inlet strainers, PumpArmor, maintenance kits, and pump repair kits
Specifications
| Maximum Flow | ~ 1.20 GPM (4.5 L/min) |
|---|---|
| Maximum Pressure | 3300 psi (227 bar) |
| Max Tip Size | Up to 0.035" (single gun); up to ~0.027" (two guns, material dependent) |
| Motor | 2.4 hp brushless DC |
| Hose Capacity | Supports up to ~400 ft total hose (setup dependent) |
| Control & Connectivity | SmartControl 4.0; BlueLink job/sprayer telemetry |
| Cart | Hi-boy frame with flat-proof wheels and durable lift points |
Typical In-Box Contents*
- Ultra Max II 1095 IronMan sprayer on hi-boy cart
- Contractor PC gun with RAC X guard
- RAC X LP517 tip (or comparable, region/kit dependent)
- BlueMax II 1/4" x 50 ft hose
- Inlet strainer, filters, PumpArmor
- Quick start / documentation
*Kit contents may vary by region or bundle. Always check the “Included” tab on your exact SKU.
Best For
- Large residential repaints and new construction
- Commercial interiors/exteriors and multi-unit projects
- Medium-to-high viscosity coatings (per tip/mesh guidance): primers, acrylics, elastomerics, block fillers
- Single- or two-gun operation (material and tip sizes permitting)
Buyer Notes
- IronMan trim prioritizes durability and uptime; ProContractor trim adds productivity extras (e.g., on-board hose wrap, toolbox) while sharing the core 1095 performance.
- Select RAC X tips by material & desired finish; stay within the sprayer’s max tip rating.
- Use proper filtration (inlet/manifold/gun) to minimize wear and improve finish quality.
Frequently Asked Questions
No—this is a complete sprayer (machine). Instead, choose compatible parts & accessories listed above (tips, guns, hoses, filters, pump family) for the 1095 platform.
Follow the coating TDS and stay within the sprayer’s rating (up to 0.035" single-gun). For heavy materials, consider larger orifice RAC X LP/HD tips, proper mesh filters, and short, appropriately sized hose for minimal pressure drop.
Yes, the 1095 platform supports two-gun operation with appropriately sized tips (commonly up to ~0.027" each) and material-appropriate filters. Expect reduced max orifice per gun when running dual lines.
Up to ~400 ft total hose is typical. Use 3/8" as a main line for long runs, step down to 1/4" and a short whip to the gun, and keep filters/tips matched to the material.
Strain/flush coatings, use the correct mesh filters, relieve pressure when idle, store with PumpArmor, and follow the Endurance pump service intervals. Replace wear parts proactively for consistent output.
No reviews yet. Be the first to review this product!
