Graco 103806 Blind Rivet
$5.50
In Stock
The Graco 103806 Blind Rivet is an OEM fastener used for securing components where only one side is accessible, ensuring a tight and durable hold in Graco assemblies.
- OEM Quality: Genuine Graco replacement part
- Type: Blind rivet for single-side installation
- Use: Commonly found in air motor or silencer assemblies
- Check Fit: Verify with your model’s parts manual before ordering
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Technical Overview & Specifications
Compatible Machines
At this time, no specific Graco models are documented by the OEM as using Graco 103806 (Blind Rivet) in their official parts lists for current production units. Compatibility can vary by revision; please confirm using your machine’s serial-specific parts manual.
- Open your model’s Graco repair/parts manual and search for part 103806.
- Verify the assembly callout (e.g., silencer/cover, bracket, shield, etc.).
- Match your unit’s configuration (motor type, revision, and serial range).
Key Details
| OEM Part | Graco 103806 — Rivet, Blind |
|---|---|
| Category | Fastener (permanent mechanical fastener for single-side installation) |
| Typical Use | Securing light covers, shields, or small brackets (often in or near air-motor/silencer related assemblies depending on model) |
| Notes | Dimensions (diameter, grip range, material) are not universally published; always confirm against your machine’s parts list or the removed rivet. |
| Fitment Guidance | Only list your model under “Compatible Machines” if 103806 appears in its official parts list for your serial range. |
Installation Tips (General Blind Rivet Practices)
- Confirm hole size matches rivet diameter; remove paint/debris for a clean seat.
- Use an appropriate rivet tool; support the backside surface if accessible.
- Do not reuse blind rivets; replace with new rivets of matching spec.
- If your manual specifies thread-fasteners instead, do not substitute a rivet.
Cross-Reference & Sourcing
Where a manual explicitly calls out 103806, use the OEM rivet or an exact-spec equivalent. If the dimensions are unknown, measure the removed fastener (shank Ø, grip range, head style) or consult Graco documentation for your specific model and serial range.
Frequently Asked Questions
A blind rivet provides a permanent joint when you only have access from one side of the assembly. In some Graco units it secures light covers, shields, or small brackets—exact usage varies by model.
Only if your model’s OEM parts list specifically references 103806. Check the repair-parts manual for your model and serial range; if it isn’t listed, do not assume compatibility.
The OEM does not publish a universal spec sheet for every rivet by part number. Verify by measuring the removed rivet (diameter, grip range, head type) or by checking your model’s Graco parts documentation.
Use only an exact match for diameter, grip range, and head style. When the manual specifies 103806, the safest option is the OEM rivet or a proven equivalent with identical specs.
No. Blind rivets are single-use fasteners. Once set, they must be drilled out and replaced if the joint is opened.
No reviews yet. Be the first to review this product!
