Graco 165843 Poppet
$262.50
In Stock
Graco 165843 Poppet — OEM valve element used in select pump lowers. Verify with your model’s parts diagram before ordering.
- Function: one-way sealing/check action in fluid section
- Part No.: 165843 (poppet only; seats/seals sold separately)
- Typical location: valve body/pump lower on compatible airless sprayers
- Replace if you see hard priming, pressure loss, or backflow
- Match the exact number in your manual to confirm fit
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Part Overview & Fitment Guidance
The Graco 165843 Poppet is an OEM valve component used within select Graco pump/valve assemblies to control one-way fluid flow and sealing performance. Because Graco uses different pump lowers across models and revisions, exact fitment depends on your sprayer’s pump lower/exploded-view parts list.
Key Details
| OEM Status | Genuine Graco replacement part |
|---|---|
| Part Number | 165843 |
| Component Type | Poppet (valve element) for pump/valve assemblies |
| Typical Location | Within the fluid section/valve body of select airless sprayer pump lowers |
What It Does
- Acts as a check/sealing element to maintain correct one-way flow.
- Supports consistent pressure and minimizes backflow in the pump cycle.
- Restores proper priming and spray performance when the original poppet is worn or damaged.
How to Confirm Fit Before Purchase
- Check your model & serial on the sprayer’s data plate.
- Open the sprayer’s parts manual (pump lower / valve section) and confirm the poppet line item is listed as 165843.
- If unsure, provide your model/serial to support to cross-check the pump lower revision and confirm this poppet is specified.
Installation & Maintenance Tips
- Work with a clean bench—any debris can compromise sealing.
- Inspect mating valve seat/plate for wear; replace related seals if required.
- Reassemble to the torque and orientation shown in your model’s exploded diagram.
- Flush and pressure-test after installation; check for prime retention and leaks.
Frequently Asked Questions
Hard priming, loss of pressure at the gun, pulsation, or material creeping backward into the intake side can indicate a worn or nicked poppet or seat. Inspect both parts and related seals.
This listing is for the poppet only unless your parts manual specifies a kit number that bundles seats/plates/O-rings. If your diagram calls out a kit, order the kit to ensure all wear parts match your pump lower revision.
Use your exact model/serial to open the pump lower/exploded view in the parts manual. The poppet line item must show part number 165843. If the drawing lists a different number, this poppet will not fit that configuration.
Only where the pump lower/valve assembly specifically calls out 165843. Graco uses multiple valve designs across series and revisions, so always match part numbers in your manual rather than assuming cross-series fit.
No reviews yet. Be the first to review this product!
