Graco 163925 Silver Flat Tip, 925
$35.54
$54.25
Save 34%
In Stock
Graco 163925 Silver Flat Tip (925) — wide, even coverage with a 0.025" orifice and approx. 18–20" fan. Fits standard Graco tip guards; confirm your sprayer’s pressure/flow and coating recommendations.
- Orifice: 0.025" (heavier coatings)
- Fan: ~18–20" at typical distance
- Interface: Graco Silver Flat Tip guard
- Use: Large surfaces; quick, consistent finish
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Details
Compatible Machines
Works with most Graco airless spray guns/sprayers that accept the standard Silver Flat Tip and matching tip guard. Always verify the gun/guard thread and pressure rating for your specific unit.
- Ultra Max II 395 / 595 / 795
- Ultra Max II 1095 / 1595
- Mark V HD 3-in-1
- Mark X HD 3-in-1
- GMAX II 3900
- GH 230 / GH 300
- Magnum X5 / Magnum X7
- ProX17 / ProX19 / ProX21
Product
Graco 163925 — Silver Flat Tip (925) airless spray tip designed for consistent flat fan with fine edge definition on compatible Graco spray guns and systems.
Specifications
| Part Number | 163925 |
|---|---|
| Tip Series | Silver Flat Tip |
| Tip Size Code | 925 (fan digit “9” ≈ 18–20" fan at ~12" distance; last two digits “25” = 0.025 in orifice) |
| Orifice Size | 0.025 in (≈ 0.635 mm) |
| Approx. Fan Width | 18–20 in (at typical spray distance; varies by pressure/paint) |
| Typical Flow (Water @ ~2000 psi) | ~0.67 GPM (≈ 2.5 L/min) — indicative only |
| Max Working Pressure | Up to 5000 psi (345 bar), limited by gun/guard/sprayer rating |
| Interface | Fits standard Graco tip guards for Silver Flat Tips |
| Typical Uses | Architectural & industrial coatings where a wide, consistent flat fan is desired |
Key Features & Benefits
- Wide, even fan for faster coverage on large surfaces.
- 0.025 in orifice suited to higher-build materials (confirm with coating data sheet).
- Graco-standard tip/guard interface for quick swaps and broad gun compatibility.
- Durable construction designed for professional, high-duty cycles.
Frequently Asked Questions
It fits most Graco airless guns/sprayers that use the standard Silver Flat Tip guard. Confirm your gun’s tip guard type and pressure rating in the sprayer/gun manual before use.
The first digit sets the fan width (e.g., “9” ≈ 18–20" at ~12"). The last two digits are the orifice in thousandths of an inch (e.g., “25” = 0.025"). Match fan/orifice to your coating, surface size, and sprayer capacity.
Heavier architectural/industrial coatings are typical, but always check the paint manufacturer’s tip size recommendation and confirm your sprayer can sustain the required pressure/flow.
No. Silver Flat Tip is a flat (non-reversible) style. RAC X tips are reversible for clearing clogs and require a compatible RAC X guard. Use the guard/tip style specified for your gun.
Use proper filtration, maintain clean materials, keep spray pressures as low as practical for atomization, and flush/clean after each use. Replace the tip when fan edges round off or when flow increases noticeably.
No reviews yet. Be the first to review this product!
