Graco 163826 Fine Finish Flat Tip
$43.23
$66.00
Save 35%
In Stock
The Graco 163826 Fine Finish Flat Tip (826) delivers a soft, controlled fan for cabinetry, trim, and furniture. Pair with a Silver Plus gun using the correct flat-tip guard for best results.
- Fan: approx. 16–18 in.
- Orifice: 0.026 in.
- Guard: 220247 flat-tip, 7/8"
- Use With: Silver Plus Airless Spray Gun
- Materials: lacquers, varnishes, urethanes
- Max Pressure: up to ~3000 psi*
- Note: not a RAC reversible tip
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility (Graco 163826 Fine Finish Flat Tip – 826)
Compatible Machines / Guns
This Graco 163826 Fine Finish Flat Tip (826) is a flat, non-reversible fine-finish tip. It is used on guns/rigs that accept the dedicated Fine Finish Flat Tip Guard (220247, 7/8" thread).
- Graco Silver Plus Airless Spray Gun (with 220247 tip guard)
- Graco electric & gas airless sprayers when paired with the Silver Plus gun (e.g., many Ultra Max II and GMAX II units that use a Silver Plus gun and 7/8" guard)
Key Details
| Part Number | 163826 (Fine Finish Flat Tip – 826) |
|---|---|
| Fan Pattern | 16–18 in. (approx. 41–45 cm) |
| Orifice Size | 0.026 in. |
| Max Working Pressure | Up to 3000 psi (depending on gun/pump limits) |
| Tip Guard Required | 220247 Fine Finish Flat Tip Guard (7/8" thread) |
| Recommended Materials | Lacquers, varnishes, urethanes, and other fine-finish coatings |
| Series / Type | Fine Finish Flat Tip (163xxx series), airless spray tip |
Where this tip excels
- Cabinetry, millwork, doors, trim, furniture and other fine-finish surfaces
- When a soft, controlled flat-fan pattern is preferred for thin-to-medium coatings
Setup & selection tips
- Match filter/strain level to coating; keep clean to maintain fine atomization.
- Start at the lowest pressure that fully atomizes; excessive pressure increases wear and overspray.
- Confirm your gun uses the 220247 flat-tip guard; RAC X/5 reversible guards are not compatible with this tip style.
Frequently Asked Questions
No. Graco 163826 is a Fine Finish Flat tip and uses the dedicated Flat Tip Guard 220247 (7/8"). It is not compatible with RAC reversible guards.
Use sprayers that are paired with a Graco Silver Plus Airless Spray Gun equipped with the 220247 guard and operating within pressure/flow limits. Many Graco contractor rigs (e.g., selected Ultra Max II and GMAX II units) can be configured this way—verify your gun/guard and sprayer specifications before use.
Best for fine-finish materials such as lacquers, varnishes, and urethanes. Always follow the coating manufacturer’s recommendations for thinning and filtration.
The 826 size produces an approximate 16–18 inch fan with a 0.026 in. orifice (when sprayed at typical working pressures).
No reviews yet. Be the first to review this product!
