Graco 163823 Silver Flat Tip, 823
$35.54
$54.25
Save 34%
In Stock
The Graco 163823 Silver Flat Tip (823) is a flat, non-reversible airless tip with a 0.023 in orifice and an approx. 16–18 in fan. Use with a compatible flat tip guard and a sprayer rated up to 5,000 psi.
- Tip Type: Flat, non-reversible (use with Flat Tip Guard 220251)
- Orifice: 0.023 in | Code: 823
- Fan Width: ~16–18 in (material/technique dependent)
- Max Pressure: 5,000 psi
- Interface: 7/8" flat-guard style (not RAC reversible)
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Specs for 163823
Compatible Machines
The Graco 163823 Silver Flat Tip (823) works with airless sprayers/guns that accept a flat tip guard (e.g., Flat Tip Guard 220251) and meet the required pressure/flow. Always confirm your gun/guard interface and sprayer rating before use.
- Any Graco airless sprayer using a 7/8"-thread flat tip guard and rated up to 5,000 psi
- Graco airless guns such as Silver Plus Gun and many Contractor PC / FTx variants (when fitted with compatible flat tip guard)
- Commonly paired sprayer series (when equipped with a compatible gun/guard): Ultra / Ultra Max, Ultra Max II 395–1595, Mark IV / Mark V / Mark X
- Other professional sprayers used for architectural or light industrial coatings that support flat (non-reversible) tips
Key Specifications
| Part Number | 163823 – Silver Flat Tip |
|---|---|
| Orifice / Size Code | 0.023 in (823) |
| Fan Width (Approx.) | 16–18 in (technique, distance, and material dependent) |
| Max Working Pressure | 5,000 psi |
| Tip Type | Flat, non-reversible (use with flat tip guard, e.g., 220251) |
| Thread / Interface | 7/8" guard interface (flat tip style) |
| Typical Materials | Architectural coatings (latex, acrylics), primers, enamels—subject to viscosity and sprayer capacity |
| What’s Included | Tip only – guard, seals, and gun sold separately |
Fitment & Use Notes
- Use only with a compatible flat tip guard (e.g., 220251); RAC-style reversible guards are not compatible.
- Verify your sprayer’s flow capability for a 0.023 in tip; heavier materials may require higher-output pumps.
- Maintain correct spray distance and overlap to achieve the stated fan width (16–18 in).
- Filter selection and hose length can affect performance—match them to material viscosity and tip size.
Recommended Applications
- Walls, ceilings, broad surfaces where a wider fan pattern improves productivity
- Primers and mid-viscosity architectural coatings where 0.023 in flow is appropriate
- Light industrial touch-ups needing a flat, consistent pattern
| Frequently Asked Questions |
|---|
No. The 163823 is a flat, non-reversible tip and requires a compatible flat tip guard (e.g., 220251). RAC-style reversible tips/guards are different and not interchangeable.
0.023 in is typically used for higher-output architectural coatings and larger surface coverage. For fine-finish/cabinetry, smaller orifices are common. Match tip size to coating viscosity, desired film build, and sprayer capacity.
Expect approximately 16–18 inches at a standard spray distance with proper technique. Actual results vary with pressure, coating, and speed of pass.
For best performance, match your gun/pump filters and hose length/diameter to the coating and tip size. Heavier coatings and larger tips may benefit from coarser filters and shorter, larger-ID hoses.
No reviews yet. Be the first to review this product!
