Graco 163821 Silver Flat Tip, 821
$35.54
$54.25
Save 34%
In Stock
The Graco 163821 Silver Flat Tip (821) is a durable, high-pressure flat-spray tip for consistent coverage. Use with Silver Flat Tip guard/seat on airless sprayers rated up to 5000 psi.
- Orifice: 0.021" for medium-to-heavy coatings
- Fan width: ~16–18" (pressure & distance dependent)
- Pressure rating: up to 5000 psi
- Fits: Guns/sprayers using the Silver Flat Tip guard/seat
- Use on: primers, acrylics, elastomerics (check TDS)
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Product Overview – Precision Flat-Spray Tip for Airless Applications
Compatible Machines
This Graco 163821 Silver Flat Tip (821) fits Graco airless sprayers and guns that use the Silver Flat Tip seat/guard and are rated up to 5000 psi. Confirm your gun’s tip guard/seat before purchase.
- Contractor-grade Graco airless sprayers using Silver Flat Tip guard/seat (up to 5000 psi)
- Popular Graco rigs (verify guard/seat): Ultra Max II Series (795 / 1095 / 1595)
- Texture/High-output rigs (verify guard/seat): Mark V HD, Mark X HD
- Gas & hydraulic duty (verify guard/seat): GMAX II 3900; GH 230 / GH 300
- Prosumer units (verify guard/seat & pressure): Magnum X5, X7; ProX17 / ProX19 / ProX21
Key Details
The Graco 163821 Silver Flat Tip (821) delivers a consistent, fan-shaped pattern for uniform coverage on medium-to-heavy coatings.
| Specification | Value |
|---|---|
| Part # | 163821 |
| Tip Code | 821 (8 ≈ fan size; 21 = 0.021" orifice) |
| Orifice Size | 0.021" |
| Typical Fan Width | Approx. 16–18" (at standard gun distance) |
| Max Working Pressure | 5000 psi (approx.) |
| Series | Graco Silver Flat Tip |
| Use On | Airless guns/sprayers with matching Silver Flat Tip guard/seat |
Features & Benefits
- Consistent fan for even coverage on walls, siding, steel, and general protective coatings.
- Tungsten-carbide orifice for durability with medium-to-heavy paints.
- 0.021" size suited to higher-build coatings when matched with proper pump output.
- High-pressure capability (up to 5000 psi) for contractor/industrial workflows.
Typical Applications
- Interior/Exterior walls, ceilings, block, and masonry
- Primers, acrylics, elastomerics (check manufacturer’s TDS for tip sizes)
- Protective coatings where a wide, even fan is desired
Selection & Setup Tips
- Match the tip guard/seat to the Silver Flat Tip family (do not mix with RAC-type guards).
- Ensure your sprayer’s pressure rating meets or exceeds the tip’s requirements.
- Start at lower pressure; increase only until tails disappear for a proper atomized fan.
- Filter appropriately to reduce tip wear and improve finish quality.
Frequently Asked Questions
The 163821 (821) fits systems that use the Silver Flat Tip guard/seat and operate up to about 5000 psi. Check your gun’s guard part number and sprayer pressure rating. If you’re using RAC-type guards (RAC V/X), select the corresponding RAC tip family instead.
An 0.021" orifice is commonly used for medium-to-heavy materials such as acrylics, block fillers, and elastomerics—provided your pump can maintain adequate pressure/flow. Always consult the paint manufacturer’s TDS for recommended tip sizes.
Begin at the lowest pressure that produces a full fan with no “tails,” then adjust slightly upward as needed. Maintain clean filters, keep the gun at a consistent distance, and overlap passes by about 50% for even coverage. Replace worn tips to maintain pattern and output.
No reviews yet. Be the first to review this product!
