Graco 124926 V-A Section Belt
$57.55
$62.75
Save 8%
In Stock
The Graco 124926 A-section V-belt is an OEM drive belt used in RoadLazer RoadPak systems, providing reliable power transfer and proper pulley alignment.
- V-Belt Type: A-Section
- Outer Length: Approx. 8.5 in
- Durable OEM construction
- Designed for RoadLazer RoadPak units
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Graco 124926 V-Section “A” V-Belt
The Graco 124926 belt is a genuine OEM **V-belt, A-section**, used in various Graco road-striping and line-marking machines. Reliable and correctly sized for factory-installed pulley systems.
Key Specifications
| Part Number | 124926 |
|---|---|
| Belt Type | V-Belt (A-section) |
| Cross-Section | A / A-section |
| Length | Approx. 8.5 in (21.6 cm) outer length :contentReference[oaicite:0]{index=0} |
| Height / Width | 1.55 in (height) × 8.5 in (width) per spec sheet :contentReference[oaicite:1]{index=1} |
| Material | Rubber / reinforced V-belt (OEM) |
Compatible Graco Machines
This belt is used in Graco **RoadLazer RoadPak** line-striping systems. :contentReference[oaicite:2]{index=2}
- RoadLazer RoadPak (Model 24G624)
- RoadLazer RoadPak (Model 24G625)
Why Choose the OEM 124926 Belt?
- Precisely matched to Graco’s idler and drive pulleys for optimal alignment
- OEM construction ensures proper tensile strength and longevity
- Using genuine parts helps reduce the risk of slippage or premature wear
Installation & Maintenance Tips
- Turn off and lock out the engine before working on the drive system.
- Inspect the idler pulley (Graco part 124880) for wear before installing a new belt. :contentReference[oaicite:3]{index=3}
- Ensure belt ribs align with pulley grooves properly.
- Tension the belt moderately — avoid over-tightening, which can overload bearings.
- Check belt condition periodically (cracks, glazing, fraying) and replace if worn.
Where to Order
You can find the 124926 belt from authorized Graco parts distributors, for example:
- Pittsburgh Spray Equipment – Graco 124926 V-belt :contentReference[oaicite:4]{index=4}
- Spray Foam Systems – Graco 124926 :contentReference[oaicite:5]{index=5}
Frequently Asked Questions
The 124926 belt is specified for Graco RoadLazer RoadPak striping systems, including models 24G624 and 24G625. :contentReference[oaicite:6]{index=6}
While some aftermarket belts may have similar dimensions, using the OEM 124926 ensures correct tension, alignment, and durability under Graco’s designed pulley system. An incorrect belt could wear prematurely or slip.
Inspect the belt regularly (for example, at every maintenance service). Replace it if you see cracking, glazing, or fraying. In heavy-duty or high-use environments, replacement every season might be required.
When installing, make sure the belt ribs fully seat in the pulley grooves. Use the idler pulley to adjust tension. Avoid overtightening — the belt should be firm but not pulling heavily on the shaft.
No reviews yet. Be the first to review this product!
