Graco 249200 Q Kit, Fltr,Gun
$12.60
In Stock
The Graco 249200 Q Kit, Fltr,Gun is a replacement gun filter kit designed for optimal spray performance and reduced tip clogging. Perfect for maintaining smooth and consistent flow with thin coatings like stains and lacquers.
- Fits: Contractor II, FTx / FTx II, and Contractor PC Spray Guns
- Filter Type: 100 Mesh (for fine finishes)
- Replaces: Graco 287033 Filter
- Use With: Thinner materials such as stains and lacquers
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Compatibility for Graco 249200 Q Kit, Fltr,Gun
Compatible Machines / Guns
This kit contains a Gun Filter that fits the following Graco spray guns (100-mesh class):
- Graco Contractor II Spray Gun
- Graco FTx / FTx II Spray Gun
- Graco Contractor PC (and “New Contractor” style) Spray Gun
What is the Graco 249200 Q Kit?
The Graco 249200 is a Gun Filter kit used in selected Graco airless spray guns to capture debris and reduce tip-plugging. It corresponds to the common Graco gun filter spec associated with part 287033 (100 mesh)—ideal for thinner materials such as stain and lacquer.
Quick Specs
| Attribute | Detail |
|---|---|
| Part Number | 249200 (Q Kit, Fltr, Gun) |
| Filter Reference | Associated with 287033 (Gun Filter, 100 mesh) |
| Mesh Rating | 100 mesh (for thinner materials: stains, lacquers, clears) |
| Fits Guns | Contractor II, FTx / FTx II, Contractor PC |
| Function | Reduces tip plugging, improves finish by removing particles from the fluid stream |
| Typical Use | Residential & commercial coatings where a fine 100-mesh screen is appropriate |
Key Benefits
- Minimizes tip clogs for smoother, consistent spray patterns
- Protects spray tips and extends component life
- Fast maintenance: easy “in-gun” filter access and replacement
Usage & Selection Notes
- Choose 100 mesh for thinner materials (stains, lacquers, clear coats).
- For thicker coatings (primers/latex), consider a 60 mesh gun filter (sold separately).
- Always depressurize the sprayer before servicing the gun filter.
- Match the gun model (Contractor II / FTx / Contractor PC) to ensure compatibility.
Frequently Asked Questions
Yes—249200 is a gun filter kit associated with the 287033 (100 mesh) specification used in Contractor II, FTx/FTx II, and Contractor PC spray guns. Verify your gun model to be sure.
Use 100 mesh for thin materials (stains, lacquers, clears). For thicker primers and latex, a 60 mesh gun filter is typically recommended (check your coating and tip size).
Inspect the filter daily (or at each material change). Replace if damaged, excessively dirty, or if you experience repeated tip clogs or pressure fluctuations.
This kit fits guns, not the pump manifold. If your sprayer is equipped with a Contractor II, FTx/FTx II, or Contractor PC gun, then 249200 is applicable. For manifold filters, see your sprayer’s parts list.
Strain coatings before use, keep lids on buckets, clean the gun and filter after each session, and match mesh to material viscosity. Pair with the correct spray tip size for best results.
No reviews yet. Be the first to review this product!
