Graco AAM919 Air-Assisted Airless Spray Tip
Achieve smooth and consistent finishes with the **Graco AAM919 Spray Tip**, designed for medium-to-wide surface applications and reliable performance.
- Orifice Size: 0.019″ – medium finish
- Fan Width: 18–20″
- Compatible Guns: Graco PerformAA, AA/AXM series tip guards
- Application: Paints, lacquers, primers, general finishing
- OEM Quality: Long-lasting and professional results
Compatible Machines & Overview – Graco AAM919 Spray Tip
The **Graco AAM919 Spray Tip** (also identified as AXM919) is a standard flat spray tip with a **0.019″ orifice and approximately an 18–20″ fan pattern**, designed for consistent atomization in finishing applications on medium‑to‑large surfaces. It directly replaces AAM919 / AXM919 tips for Graco guns that accept AA/AXM series tips. :contentReference[oaicite:0]{index=0}
Compatible Sprayer Guns & Machines
Use this tip with Graco spray guns and assemblies that use AA/AXM series flat tips — ideal for **PerformAA** and similar air‑assisted or airless spray guns:
- Graco PerformAA air assist spray guns (AA/AXM tip compatible) :contentReference[oaicite:1]{index=1}
- Other Graco manual AA/AXM gun assemblies with 0.019″ tip support :contentReference[oaicite:2]{index=2}
- Air‑assisted finish systems that accept 919/AXM‑series spray tips :contentReference[oaicite:3]{index=3}
Key Specifications
| Specification | Details |
|---|---|
| Part Number | AAM919 / AXM919 |
| Orifice Size | 0.019″ standard pattern |
| Fan Width | 18–20″ (at ~12″ from surface) :contentReference[oaicite:4]{index=4} |
| Tip Series | AA/AXM spray tip |
| Application | Medium‑to‑wide surface finishing |
Product Highlights
- OEM Graco quality for reliable service life
- Consistent output across low, medium, and high pressure spray conditions :contentReference[oaicite:5]{index=5}
- Wide fan pattern for balanced coverage on broad surfaces
Frequently Asked Questions
This tip is suitable for medium‑to‑low viscosity coatings such as paints, lacquers, and general finishing materials, providing good control with the 0.019″ orifice size. Adjust pressure and air assist per material recommendations for best results.
Check that your gun’s guard or tip holder accepts AA or AXM series spray tips — this ensures the AAM919/AXM919 will install correctly. If unsure, refer to your gun’s manual for tip series compatibility.
After use, flush the tip with appropriate solvent, use a soft brush or reverse spray (if supported) to dislodge debris, and avoid letting coating material harden inside the orifice to prolong tip life and spray quality.
No reviews yet. Be the first to review this product!
