Graco 69325ST Uni-Tip 325 S Assembly Tip
The Graco 69325ST Uni-Tip 325 S Assembly Tip is a professional airless spray tip designed to deliver a controlled fan pattern and consistent coating flow for efficient spraying on narrow surfaces.
- Tip Size: 325
- Orifice Size: 0.025 inch
- Fan Width: Approx. 6 inches
- Spray Pattern: Even fan spray
- Application: Latex paints, primers, and heavier coatings
- Compatibility: Fits Graco airless spray guns with standard tip guards
- Installation: Mounted in the spray gun tip guard
The Graco 69325ST Uni-Tip 325 S Assembly Tip is designed for use with a wide range of professional Graco airless paint sprayers and spray guns that accept standard flat spray tips and tip guards. It is commonly used on contractor-grade systems for applying medium to heavy coatings with precision and control.
Compatible Graco Airless Sprayers
- Graco Ultra Series Airless Paint Sprayers
- Graco Mark Series Airless Sprayers
- Graco GH Series Hydraulic Airless Sprayers
- Graco GMax Series Gas Airless Sprayers
- Graco LineLazer Line Striping Systems
- Most Graco contractor airless sprayers using standard tip guards
Overview of Graco 69325ST Uni-Tip 325 S Assembly Tip
The Graco 69325ST Uni-Tip 325 S Assembly Tip is a professional airless spray tip designed to control the spray pattern and material flow during coating applications. Installed at the front of the spray gun within the tip guard, the tip helps atomise coatings into a consistent fan pattern for smooth and efficient coverage.
This tip size is commonly used for medium to thicker coatings and provides controlled application on narrower surfaces such as trim, railings, beams, and detailed areas where precision spraying is important.
Product Specifications
| Product Name | Graco 69325ST Uni-Tip 325 S Assembly Tip |
|---|---|
| Tip Size | 325 |
| Orifice Size | 0.025 inch |
| Spray Fan Width | Approximately 6 inches (15 cm) |
| Spray Pattern | Fan pattern |
| Typical Use | Latex paint, primers, and heavier coatings |
| Installation Location | Front of airless spray gun inside the tip guard |
Understanding the 325 Tip Size
Airless spray tip numbers represent both the spray fan width and the orifice size. With the Graco 69325ST Uni-Tip 325 S Assembly Tip, the first digit indicates the spray fan width while the last two digits represent the orifice diameter.
- The first number 3 produces an approximate 6-inch fan width when sprayed from the recommended distance.
- The last two digits 25 indicate a 0.025-inch orifice size.
- This configuration allows higher material flow for thicker coatings.
Typical Applications
The Graco 69325ST Uni-Tip 325 S Assembly Tip is commonly used by contractors and professional painters for applications requiring efficient coverage with controlled spray width.
- Exterior and interior latex paints
- Primers and sealers
- Industrial coatings
- Protective coatings
- Trim, railings, and narrow surface spraying
Frequently Asked Questions
No reviews yet. Be the first to review this product!
