Graco 248204 Pump Assembly for 695 and 795
The Graco 248204 Pump Assembly is a complete OEM fluid section designed for Ultra Max II and Ultimate MX II sprayers, ensuring reliable paint flow and consistent spray performance.
- Fits: Ultra Max II 695 & 795, Ultimate MX II 695 & 795
- Max Pressure: 3600 PSI (250 bar)
- Includes: Piston rod, sleeve, valves, and packings
- Replacement for: Worn or leaking pump assemblies
Compatible Machines
- Graco Ultra Max II 695 (selected first-generation/early series)
- Graco Ultra Max II 795 (selected first-generation/early series)
- Graco Ultimate MX II 695
- Graco Ultimate MX II 795
Product Overview
The Graco 248204 is the OEM pump assembly (complete fluid section) used on specific Ultra Max II/Ultimate MX II 695 & 795 sprayers. It includes the piston/rod, cylinder/sleeve, intake valve & ball, and fluid packings—restoring pumping performance when the original fluid section is worn or damaged.
| Key Specs | |
|---|---|
| Graco Part # | 248204 |
| Type | Complete pump assembly / fluid section for select 695 & 795 units |
| Max Working Pressure | Up to 3600 psi (250 bar) (per generation documentation) |
| Typical Outlet | 1/4 in. NPT (f) |
| Service Packings (when rebuilding) | Packing repair kit 248212 services pump 248204 (see Notes) |
Specs can vary by series; verify against your unit’s manual.
What’s Included
- Piston rod & cylinder/sleeve
- Intake valve & ball
- Fluid packings
Notes & Cross-References
- Packing Repair Kit: For servicing the internal packings of pump 248204, use repair kit 248212. This is not a complete fluid section.
- Generations: Compatibility applies to specific early/1st-generation Ultra Max II 695/795 and Ultimate MX II variants—confirm by model & serial.
Frequently Asked Questions
248204 replaces the entire fluid section/pump assembly (rod, sleeve, valves, packings). 248212 is the packing repair kit used to rebuild the seals inside pump 248204 when the hardware is still serviceable.
Match your sprayer’s model/series and serial range against the parts list in your Graco manual. Early/1st-generation Ultra Max II 695/795 use the 248204 pump; later generations may differ.
- Loss of pressure or pulsation that persists after tip/filters are checked
- Material bypass/leakage past packings or erratic spray pattern
- Rod/sleeve scoring or severe valve/seat wear found during teardown
Refer to your pump repair manual for inspection points and rebuild steps.
Basic hand tools plus a bench vise are typical; follow Graco’s pressure-relief and assembly procedures exactly. The official manual lists recommended tools and sequence.
