Graco 289260 Finex Air Spray Gravity Feed Gun
$217.50
In Stock
Compact HVLP gravity-feed gun for clean, controlled finishing. Ready for shop air and ideal for automotive, wood, and metal work.
- Nozzle/needle: 1.4 mm (0.055")
- Air inlet: 1/4" NPSM
- Max air/fluid pressure: 100 psi
- Fluid port (adaptable): 3/8" NPSM
- Sprays waterborne & solventborne coatings
- Works with HVLP compressor/spray booth setups
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Precision HVLP Gravity Gun for Clean, Controlled Finishing
Compatible Machines / Setups
Graco 289260 Finex Air Spray Gravity Feed Gun connects to common compressed-air finishing systems. If your setup meets the air and thread specs below, it will work.
- HVLP spray stations powered by a clean, dry air compressor (regulated up to 100 psi)
- Manual spray booths for automotive, wood, metal, or industrial finishing
- Robotic / fixed-mount spray cells (with proper mounting and air feed)
- Pressure-pot supply systems (when adapted; uses 3/8" NPSM fluid port)
- Any setup using a 1/4" NPSM air line to the gun and compatible gravity cup
Product Overview
Graco 289260 Finex is a compact, lightweight HVLP gravity-feed spray gun designed for precise atomization and reduced overspray. Its versatile 1.4 mm (0.055") setup makes it a strong choice for primers, basecoats, clearcoats, lacquers, and waterborne finishes on small to mid-size parts.
Key Features
| Gun Type | HVLP air spray, gravity-feed |
|---|---|
| Nozzle / Needle | 1.4 mm (0.055") general-purpose finishing |
| Air Inlet | 1/4" NPSM (standard shop air fittings) |
| Fluid Port | 3/8" NPSM (for pressure-feed adaptation if required) |
| Max Air / Fluid Pressure | 100 psi (HVLP typically operated at lower regulated pressures) |
| Typical Materials | Epoxies, urethanes, waterborne and solventborne coatings, lacquers, sealers, high-solids finishes (within viscosity range) |
| Construction | Lightweight body; stainless/engineered wetted parts for durability |
Where It Excels
- Automotive spot repair & parts refinishing
- Woodworking cabinetry, furniture & trim
- Metal fabrication touch-ups & production runs
- Signage, fixtures, and prototype finishing
What’s Included
- Graco 289260 Finex HVLP gravity-feed spray gun (1.4 mm)
- Air cap / nozzle set, basic tool kit
- Gravity cup (model may vary by region/kit)
Quick Setup Tips
- Connect clean, dry air via 1/4" NPSM line; regulate to your coating’s recommended HVLP pressure.
- Strain material; adjust viscosity for a 1.4 mm setup.
- Start with fan fully open, 1.5–2 turns out on fluid, then fine-tune fan/atomizing air on a test panel.
Frequently Asked QuestionsAbout the Graco 289260 Finex
Yes-if your compressor delivers clean, dry air regulated for HVLP and connects via 1/4" NPSM. Operate within the gun’s 100 psi maximum and your coating’s recommended cap pressure.
General-purpose finishes: base/clear coats, lacquers, varnishes, sealers, many waterborne and solventborne coatings, and light to mid-viscosity primers (thinning may be required—always test on a panel).
Yes. The gun can be adapted to pressure-feed setups via the 3/8" NPSM fluid port. Ensure correct regulators and keep within the gun’s pressure ratings.
Flush after each use, clean the air cap and 1.4 mm orifice with non-marring tools, lubricate moving parts sparingly, and replace wear items when fan edges become fuzzy or the pattern streaks.
No reviews yet. Be the first to review this product!
