Graco 289259 Finex Air Spray Gravity Feed Gun
Graco 289259 Finex Air Spray Gravity Feed Gun is a compact, high-precision HVLP gun engineered for professional finishing on wood, metal, and industrial surfaces. Built for consistent results and long-term reliability.
- Type: HVLP gravity-feed spray gun
- Nozzle Size: 1.2 mm (0.047 in)
- Air Inlet: 1/4 in NPSM
- Max Pressure: 100 psi (0.7 MPa)
- Applications: Automotive, woodworking, and industrial coatings
- Compatible Systems: Any regulated air compressor or booth HVLP setup
Compatible Machines & Systems
Graco 289259 Finex Air Spray Gravity Feed Gun is a universal, compressed-air HVLP finishing gun. It is not tied to a single sprayer model if your setup meets the air/fluid specs below, it will work.
- Shop/commercial air compressor systems with regulator & filter (air inlet 1/4 in NPSM)
- Top-mount gravity-feed cup assemblies for small/medium jobs
- Remote pressure pot / fluid reservoir feeds (≤ 100 psi), with suitable adapters
- Spray booths & finishing lines using compressed-air HVLP/conventional air setups
- Graco/aftermarket air regulators, hoses, moisture traps matching 1/4 in NPSM air fittings
- Portable air supply carts with filter/dryer where clean, dry air is required
What this product is
Graco 289259 is a compact Finex mini gravity-feed HVLP air spray gun built for fine-finish control and reduced overspray. It pairs ergonomic handling with a precision 1.2 mm (≈ 0.047 in) nozzle/needle set and a non-bleeder design for clean atomization on wood, metals, plastics, and more.
Key benefits
- HVLP efficiency for transfer rate and overspray reduction
- Lightweight, ergonomic body for long spray sessions
- Integrated air inlet cheater valve for quick on-gun adjustment
- Handles a wide range of coatings: waterborne, solvent-borne, urethane, epoxy, sealants, high-solids (within spec)
Technical Specifications
| Product | Graco 289259 Finex Air Spray Gravity Feed Gun |
|---|---|
| Spray technology | HVLP (High Volume, Low Pressure), manual air spray |
| Nozzle / Needle | Approx. 1.2 mm (0.047 in) set (mini fine-finish) |
| Air inlet | 1/4 in NPSM |
| Fluid inlet | 3/8 in NPSM (when used with remote feed/adapter) |
| Max air pressure | 100 psi (0.7 MPa) |
| Max fluid pressure | 100 psi (when used with pressure feed within spec) |
| Typical applications | Cabinetry, wood finishing, light industrial, automotive spot/trim, plastics, metals |
In the box
- Finex gravity-feed HVLP gun with air cap, needle & nozzle
- Top-mount gravity cup (capacity varies by kit)
- Basic tool/maintenance items (as supplied by kit)
Setup & usage tips
- Use clean, dry air with a filter/dryer and regulator; start with low inlet pressure and adjust
- Strain coatings; tune viscosity for HVLP (reduce per coating manufacturer guidance)
- Dial in pattern with fan, fluid, and on-gun cheater valve before production work
Frequently Asked Questions
No reviews yet. Be the first to review this product!
