Graco 289248 Finex Air Spray Pressure Feed Gun
Graco 289248 Finex Air Spray Pressure Feed Gun - lightweight, fine-finish HVLP gun for pressure-fed setups. Includes a 1.2 mm needle/nozzle, non-bleeder air valve, and inlet “cheater” control for quick tuning.
- Feed: Pressure-feed (remote cup/pressure pot or pump required)
- Air inlet: 1/4" NPSM
- Fluid inlet: 3/8" NPSM (female)
- Best for: Cabinetry, furniture, metals, general industrial finishing
- Compatible systems: Graco pressure pots/remote cups, diaphragm or piston feed pumps, booth/bench finishing setups
Fine-Finish HVLP Pressure-Feed Spray Gun for Pro Results
Compatible Machines / Systems
Graco 289248 Finex Air Spray Pressure Feed Gun connects to any pressure-feed fluid source and compressed-air supply with matching thread sizes.
- Graco pressure pots / remote cups (2 qt to multi-gallon tanks) with regulated fluid & air lines
- Diaphragm or piston feed pumps configured for air spray / HVLP delivery
- Booth or bench finishing systems with low-pressure regulated fluid supply
- Circulating / batch systems using standard 1/4" air and 3/8" fluid connections
Overview
The Finex 289248 is a lightweight, ergonomic HVLP pressure-feed spray gun built for consistent fine-finish results on cabinetry, furniture, metals, and general industrial work. A factory-matched 1.2 mm needle/nozzle set delivers tight atomization, while the non-bleeder design and integrated “cheater” air-inlet adjustment help dial in material flow, fan pattern, and finish quality with minimal overspray.
Key Features
- Pressure-feed HVLP gun for remote cup, pot, or pump supply
- 1.2 mm (0.047") needle/nozzle for fine atomization
- Non-bleeder air valve & cheater air control at inlet for quick tweaks
- Balanced, lightweight body to reduce fatigue in all-day production
- Tool-less pattern, fluid, and air adjustments for rapid setup changes
Technical Specifications
| Product | Graco 289248 Finex Air Spray Pressure Feed Gun |
|---|---|
| Spray Technology | HVLP, non-bleeder air valve |
| Feed Type | Pressure-feed (remote cup / pressure pot / pump) |
| Needle/Nozzle | 1.2 mm (0.047") set installed |
| Air Inlet | 1/4" NPSM |
| Fluid Inlet | 3/8" NPSM (female) |
| Typical Uses | Wood finishes, lacquers, enamels, primers, light industrial coatings |
What’s Included
- Finex 289248 HVLP pressure-feed spray gun (non-bleeder)
- 1.2 mm needle/nozzle set (installed)
- Air-inlet cheater adjustment
Usage Notes
- Requires a remote fluid source (pressure cup/pot or pump) and clean, regulated shop air.
- Verify thread sizes (1/4" air, 3/8" fluid) with your hoses/fittings before use.
- Match needle/nozzle size to coating viscosity and desired finish quality.
Frequently Asked Questions |
|---|
|
The 289248 is a pressure-feed model. It connects to a remote cup/pressure pot or pump via fluid and air lines-there is no gravity or suction cup on the gun body.
Match your hose ends to the gun’s 1/4" NPSM air inlet and 3/8" NPSM (female) fluid inlet. Use quality regulators and filters for best finish results.
Yes- Finex systems support multiple needle/nozzle sizes (sold separately). Choose based on coating viscosity and required film build.
The 289248 is a non-bleeder HVLP gun with an integrated cheater air-inlet control for quick adjustments.
|
No reviews yet. Be the first to review this product!
