Graco 289246 Finex Air Spray Gravity Feed Gun
$200.00
In Stock
Graco 289246 Finex Gravity-Feed Spray Gun delivers professional-quality finishes with a 1.8 mm nozzle and lightweight ergonomic design. Ideal for finishing, refinishing, and industrial coating jobs.
- Gun Type: Conventional (non-HVLP)
- Feed Style: Gravity feed
- Nozzle Size: 1.8 mm (0.071 in)
- Max Pressure: 100 psi
- Air Inlet: ¼ in NPSM
- Fluid Inlet: 3⁄8 in NPSM
- Compatible With: Finex™ and Triton™ Spray Packages
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
About the Graco 289246 Finex Gravity-Feed Air Spray Gun
Graco 289246 Finex is a lightweight, ergonomic conventional air spray gun with a gravity cup interface and a factory 1.8 mm (0.071 in) orifice. It’s built for fine finishing on wood, metal, and plastics where smooth atomization and easy pattern control are essential.
Compatible Machines / Systems
This gun integrates into compressed-air finishing setups. It “fits” the following system types and packages (match threads/pressures below):
- Graco Finex Spray Packages (finishing bundles using Finex guns)
- Graco Triton Air Spray Packages (air-operated diaphragm pump + gun)
- Pressure-pot / gravity-cup finishing systems with compatible hose threads
- Shop air compressors capable of supplying regulated air to spray guns
- Booth/line finishing rigs using conventional air spray applicators
Key Features & Benefits
- Conventional air spray atomization for smooth finishes and fast touch-ups
- Gravity-feed design for quick color changes and minimal material waste
- 1.8 mm (0.071 in) nozzle suited to primers, sealers, and medium-viscosity coatings
- ¼ in NPSM air inlet and 3⁄8 in NPSM fluid interface for easy plumbing
- Lightweight body and ergonomic controls reduce operator fatigue
- Air cap and fan controls for precise pattern shaping
Specifications
| Model | Graco 289246 Finex Air Spray Gravity Feed Gun |
|---|---|
| Gun Type | Conventional (air spray), non-HVLP |
| Feed Style | Gravity-feed (top-mounted cup / reservoir) |
| Orifice / Nozzle | 1.8 mm (0.071 in) |
| Air Inlet Thread | ¼ in NPSM |
| Fluid Inlet Thread | 3⁄8 in NPSM |
| Max Air / Fluid Pressure | 100 psi (≈ 0.7 MPa) |
| Gun Weight | Approx. ~1.2 lb |
| Typical Coatings | Primers, sealers, epoxies, urethane, high-solids, waterborne/solventborne finishes (match viscosity to 1.8 mm) |
| Included | Spray gun (cup and hoses may be sold separately-see package contents) |
Compatibility Notes
- Verify your air hose has a ¼ in NPSM fitting (or use an adapter).
- For pressure-feed/remote cup setups, ensure 3⁄8 in NPSM fluid connection compatibility.
- Do not exceed 100 psi air or fluid pressure.
- Choose material viscosity appropriate for a 1.8 mm nozzle; reduce or change tip size as needed.
Frequently Asked Questions
No-this model is a conventional air spray (non-HVLP) gravity-feed gun designed for smooth atomization with regulated shop air.
It integrates with Graco Fine and Graco Trito spray packages, standard pressure-pot or gravity-cup rigs, and any finishing setup using a regulated air compressor and compatible ¼ in NPSM air / 3⁄8 in NPSM fluid connections.
Packages vary. Many listings sell the gun only. Check your kit contents; cups, hoses, and adapters may be purchased separately or included in a spray package.
Use a shop compressor capable of providing clean, dry, regulated air within the gun’s limits (do not exceed 100 psi). Include moisture traps and a regulator for consistent atomization.
Medium-viscosity coatings such as primers, sealers, epoxies, and urethanes are a good match. For thinner clears, you may prefer a smaller orifice variant; for heavier materials, adjust reduction or pressure accordingly.
No reviews yet. Be the first to review this product!
