Graco 107265 Insulated Male Terminal
The Graco 107265 Insulated Male Terminal is a 3/16" male spade connector designed for secure electrical connections in Graco airless sprayers. Ideal for wiring harnesses, switches, and motors.
- Part Number: 107265
- Type: Insulated Male Terminal
- Blade Width: 3/16" (approx. 4.8 mm)
- Fits: Ultra, Ultra Max II, Mark Series, and GMAX II Sprayers
- Wire Size: ~16 AWG
Overview & Key Details
The Graco 107265 Insulated Male Terminal is a 3/16" male spade/blade electrical connector used throughout Graco airless sprayers for secure, vibration-resistant wiring connections (e.g., motors, switches, and harness leads). It’s commonly specified as a 3/16” male, ~16 AWG insulated terminal.
Compatible Machines (Common Usage)
The 107265 Insulated Male Terminal is used across many Graco airless sprayers. It most often appears in wiring harnesses for the following series (exact usage can vary by model year/serial range and harness revision):
- Ultra / Ultra 395, 495, 595 (Classic & Ultra Max variants)
- Ultra Max II 650/695, 750/795, 1095, 1595
- Mark Series: Mark IV, Mark V, Mark VII, Mark X (ProContractor/IronMan where applicable)
- GMAX II Series: 3900, 5900, 7900 (Standard & ProContractor where applicable)
- Contractor/ProContractor electric stand & cart sprayers using 3/16" male spade harness terminals
Fit note: Because this is an electrical terminal used within harness assemblies, usage is “universal” within many models that specify a 3/16" male spade. Always confirm against your unit’s parts list or harness diagram for your exact model and serial number.
Quick Specs
| Part Number | 107265 |
|---|---|
| Type | Insulated Male Terminal (male spade/blade) |
| Blade Width | 3/16" (approx. 4.8 mm) male spade |
| Typical Wire Size | ~16 AWG (per common Graco harness references) |
| Typical Use | Harness connections to switches, motors, boards, and service pigtails |
| Insulation | Fully insulated barrel to reduce shorts and vibration-related loosening |
Why this part matters
- Ensures a snug, low-resistance electrical connection in high-vibration sprayer environments.
- Insulation helps prevent accidental shorts and improves durability during service.
- Standard 3/16" male spade interface for quick maintenance and reliable mating with female terminals.
Installation & Handling Tips
- Disconnect power and relieve all system pressure before accessing wiring.
- Crimp to the specified wire gauge (typically ~16 AWG) using a proper ratcheting crimper.
- Align the male blade squarely into the female wrap-around blade—seat fully.
- Inspect for play; replace any terminals with loosened fit, bent blades, or heat damage.
- Follow your exact model’s service manual/parts diagram for lead colors and routing.
Frequently Asked Questions
No reviews yet. Be the first to review this product!
