Graco 395st ProB Hopper (233034) marries a compact 101-lb low-boy frame to the same Endurance Chromex pump found in the best-selling Ultra 395 PC. Pumping 0.60 GPM at 3,000 psi, it sprays interiors from primer to enamel without hunting, and the 1-gal gravity hopper slashes clean-up time when you’re jumping between touch-ups and trim colours.
Why Choose Factory-Engineered Parts Over Look-Alikes?
- ±0.002-in CNC Accuracy — OEM Chromex rods, Blue V-Max packings and carbide seats align perfectly, eliminating micro-pressure swings that create “fingers” on finish coats.
- Safety Head-Room — All hoses, seats and O-rings are rated above the sprayer’s 3 k-psi spec; bargain kits tap out at 2 k.
- QuikPak Lower — Pop two pins, slide, prime your crew is back on the wall in 5 min with zero loose springs to chase.
- Gear-Train Warranty — Only OEM gears keep the paperwork and the payout intact.
- SmartControl 3.0 — Factory sensors hold pressure steady within ±1 %, cutting tip wear by 30 %.
At-a-Glance Technical Specs
| Metric | Value |
|---|---|
| Supply Voltage | 100 – 140 VAC, 15 A |
| Motor | 0.87 hp TEFC brush |
| Max Flow | 0.60 GPM / 2.3 L·min-¹ |
| Max Pressure | 3,000 psi / 210 bar |
| Recommended Tip | .015 – .025 in RAC X LP |
| Pump Lower | Endurance 17C718 Chromex rod |
Five Ways OEM Parts Add Profit in the Field
1. Lower Amp Draw — Tight packings cut current 8 %, letting a small inverter generator run in eco-mode.
2. Tip Life +30 % — Clean 60-mesh Easy-Out filters stop grit that rounds graco spray gun parts and spray tips and guards.
3. Less Re-work — Steady 2.2 k-psi finish coats remove cat-tails on oak doors, wiping an hour off punch-list.
4. Five-Minute Pump Swaps — A spare QuikPak lower costs less than one hour of idle payroll pull, pin, prime, spray.
5. Resale Premium — Used sprayers with full OEM logs fetch 20 % more at auction.
Bundle & Save—Top-Selling Add-Ons Ship with Your Order
- graco magnum x7 replacement spray gun—Contractor PC gun for punch-lists.
- graco 650 pro—step-up rig for elastomeric crews.
- graco cordless sprayer parts—12 V lithium tanks, tips, seals.
- graco spray gun parts—complete repair kits with needles, seats, O-rings.
- graco 395 parts diagram—laminated torque chart for toolbox reference.
- graco ultra 395 pc parts—packings, rods, manifold filters.
- graco truecoat 360 accessories—bags, tips, guards for colour samples.
- Shop the Best Graco Machine—expand your fleet without a learning curve.
Field-Tested Maintenance Tips
Top up TSL every morning; keep packings slick and rust-free.
Flush warm (45 °C)—melts latex 4× faster than cold, saving solvent for oil jobs.
Rotate tips: .021 for primer, .015 for finish—doubling tip life.
Log gallons in a dry-erase tally or BlueLink; rebuild at 500 k cycles.
Colour-code bins so sprayer accessories hardware never mingles with gun kits one rogue O-ring can idle a $7 k rig.
Laminate the X7/LTS-17 diagram at the wash-down sink for instant torque checks.
Ready to Spray Faster & Bill More?
Click Add to Cart for genuine Graco 395st ProB Hopper parts. Backed by Graco’s factory warranty.