Graco 395st ProB Stand and Hopper (232926) Airless Paint Sprayers

Graco 395st ProB Stand and Hopper (232926) is the job-site secret weapon for pros who need a compact, 120-volt airless that still handles medium production work. Rated at 3000 psi maximum working pressure, the unit delivers 0.38 GPM and accepts tip sizes up to 0.019 in enough grunt to atomise acrylics, enamels and block-filler without thinning. Dry weight is a feather-light 39 lb, so one tech can load-out without strain.

Why Choose Genuine OEM Over After-Market?

1. Tolerance Control ±2 μm: factory-machined piston rods prevent early seal burn-out and pressure surf.
2. Full-rated 3000 psi Validation: each seat, seal and hose is burst-tested generic spares often implode at 2500 psi or less. 
3. Plug-and-Play SmartControl: sensors in OEM pumps talk directly to the board no annoying “pressure error” codes.
4. Graco Warranty: buy once, call once, spray all season.

Key Performance Highlights

• Endurance Pump with ProConnect: drop-out lower swaps in 60 seconds, slashing downtime on repaint blitzes. 
• SmartControl 1.0: holds pressure within ±1 %, eliminating tiger-striping on long hose runs. 
• TEFC DC Motor (½ hp): runs cool on 15-amp house current no generator hum indoors.
• Hopper Conversion: 1-gallon hopper kit minimises paint waste on accent colours and fine-finish lacquers.

Compatible Machines Stock One Shelf, Service Many

Graco’s parts ecosystem means your 395 shelf stock pulls double duty when other rigs sputter. Keep these popular models spraying with the very same graco spray tips, packings and graco whip hose you already carry:

Sibling Electric Platforms

• Ultra 395 PC and ST Max II 395/495—share the identical Endurance Chromex pump lower, filter core and graco tip guard.
• Ultra Max II 490 PC Pro—uses the same 60-mesh Easy-Out filter and ⅜-rod packings; ideal when crews mix a 120-V stand with a 490 cart.

Gas & Line-Striping Rigs

• GMAX II 3900—identical RAC X tip guards, pressure gauges and most high-pressure hoses. Two crews, one parts bin. 
• LineLazer 3900—shares the same contractor gun repair kit and inlet strainer; useful for parking-lot stripers.

DIY & Handheld Back-ups

• Graco Magnum X7 & LTS 17—RAC V/X tip guard threads match; use our “Graco X7 and LTS 17 Diagram and Parts” bundle to keep weekend warriors rolling.
• Magnum Project Painter Plus—share RAC IV/V tips and manifold filters; see the ready-made graco magnum project painter plus parts diagram.

Top Add-On Accessories

Upgrade once spray faster forever. The 395st’s compact footprint doesn’t mean you can’t pimp the rig for speed and finish quality.

• graco spray tips: step up to RAC X LP 517-619 for 30 % lower overspray on interior latex. Swap colours mid-day with our colour-coded tip boxes.
• graco whip hose: the 3 ft x ¼ in flex whip reduces wrist fatigue and improves gun control when cutting trim lines.
• graco drywall skimming blade: clip on a 24-in blade right after back-rolling to leave a glass-smooth level-5 finish.
• graco gun repair kit: our all-in-one seal, spring and needle set rebuilds an SG3 or Contractor PC in 10 minutes.

Maintenance Blueprint—Extend Pump Life by 2×

Downtime siphons profit. Follow this 3-step maintenance cycle and you’ll double your pump packing life while slashing unplanned repair calls:

1. Every 40 hours: log stroke count, flush with water or mineral spirits, add five drops of TSL via throat port.
2. Every 6 months: replace inlet ball and seat use kit #187615 (flagged superseded to 195428 in our database) before ball chatter wrecks rods.
3. Every 500 gallons: strip the Endurance pump, fit a new leather/UHMWPE packing stack and torque to 75 ft-lb as per manual.

Frequently Asked Questions

Can I run a 50-ft whip hose without losing pressure?

Yes—drop hose I.D. to ¼ in, keep tip ≤ 0.017 and SmartControl 1.0 holds ±1 % pressure. 

Is a 3900 lower pump compatible?

No—the piston diameter is larger, but seals, filters and tip guards do cross over, so stocking one kit still helps mixed fleets. 

Which spray tip is best for drywall primer?

A RAC X LP 521 balances 10-mil build with low overspray ideal before hitting with a drywall skimming blade for level-5 walls.

Ready to Level-Up Productivity?

Add genuine Graco 395st ProB Stand and Hopper (232926) parts plus graco spray tips, graco whip hose, and every accessory from Graco X7 and LTS 17 Diagram and Parts to graco gun repair kit to your cart now.

Experience a sprayer that just won’t quit.