Graco Ultra Max II 1095 Sprayer Parts List
Graco Ultra Max II 1095 is a workhorse electric airless sprayer engineered for high-volume commercial paint jobs. Because it runs at up to 3300 PSI and 1.2 GPM from a 2.4 HP brushless DC motor, every seal, rod, and electronic sensor must be precisely matched to factory tolerances. This in-depth description walks through the full Ultra Max II 1095 sprayer parts list, explains why OEM components protect your investment, and gives you maintenance tips that can triple service life.
What Makes the 1095 a Category Leader?
Graco positions the 1095 at the top end of its Standard-Series line. Chromex™ piston pump delivers twice the rod life of chrome-plated steel; SmartControl 4.0 eliminates fan-pattern fluctuations by holding pressure within ±1 PSI; and BlueLink™ telematics track gallons sprayed, location, and maintenance alerts from any phone. hi-boy cart ships with semi-pneumatic wheels so crews can roll 148 lb of hardware across rough slabs without a dolly.
Core Systems and Key Part Numbers
- Pump & Fluid Section — Endurance displacement pump, Chromex rod, upper & lower packing kit. These parts see the highest wear and are the first line of defense against coating-laden water and solvents.
- Prime & Drain — Heavy-duty dump valve plus seat gasket keep lines clear during color changes and daily shutdowns.
- Filtration — Easy-Out filter housing with stainless screens from 30-mesh (heavy latex) to 200-mesh (fine lacquer). Swap when the transducer sees a 300 PSI spike.
- Motor & Drive Train — Brushless motor assembly , Advantage drive gears , and cooling fan. These parts are covered by Graco’s Lifetime Drive Train warranty when OEM replacements are used.
- Pressure Control — Potentiometer knob, rocker switch, and 3300-PSI transducer talk to SmartControl 4.0 for rock-steady output.
- Cart & Frame — Welded steel tubing, hose rack, kickstand rod, and semi-pneumatic wheels. Field techs report fewer bearing failures versus aftermarket wheel kits.
- Graco Gun & Hose — Contractor PC gun paired with BlueMax II 1/4″ × 50 ft hose
supports tips to 0.035″, or dual-gun rigs at 0.027″ per gun.
Generational Differences & Cross-References
The 1095 has evolved through three major families:
- 1st Generation (2003–2009) — Part numbers 248034/248039; analog SmartControl 2.5 board. Packing kits and gear sets are generation-specific.
- 3rd Generation (2010–2014) — Part numbers 258727/258728; 287513 pump upgrade; many service kits end in.
- Current Standard-Series (2015–present) — Part number 17E583; SmartControl 4.0; BlueLink hardware baked in. Chromex pump rod and Advantage gears retrofit only forward, not backward.
Always match the first six digits of your sprayer’s serial number to the correct parts manual (e.g., 17E583) before ordering.
Identifying Your Ultra Max II 1095
Look for the silver data plate riveted to the drive housing. It shows:
- Model ID (e.g., “Ultra Max II 1095 Standard Series 17E583”).
- Build Date — YYMM format (2411 = November 2024).
- Maximum Pressure — 22.8 MPa / 3300 PSI.
- Serial Number — needed for warranty and BlueLink activation.
If the plate is missing, match your pump-rod diameter (7/8″ vs 1″) and gear-box casting marks to the diagrams in manual 309953E to pinpoint the correct generation.
Why Genuine Graco Parts Outperform Copycats
Third-party rods often use induction-hardened chrome instead of Graco’s proprietary Chromex™ alloy, reducing rod life by about 40 percent in abrasion tests. Non-OEM packings may swell in hot solvents, accelerating weep-hole leaks and motor contamination. Using unauthorized parts can void the Lifetime Drive Train and MaxPower motor warranties, leaving you on the hook for a costly gear-box rebuild.
Maintenance Intervals for 3× Service Life
| Task | Interval | Part No. |
|---|---|---|
| Flush with pump conditioner | Daily | LiquidShield TSL 206994 |
| Rebuild packing kit | 150 000 cycles | 248213 |
| Change Easy-Out filter | When ΔP > 300 PSI | 244067–244071 |
| Inspect drive gears | Every 500 hours | 287290 |
| Grease wheel bearings | Yearly | 179811 kit |
Frequently Replaced Parts (Top Five)
- Packing Kit 248213 — Solvent exposure, high PSI.
- Transducer 243222 — Clogged filters, pressure spikes.
- Dump Valve 235014 — Paint debris, dry storage.
- Rod 241279 — Abrasive fillers in block-fill coatings.
- Wheel Set 179811 — Curb impact, rough terrain.
Stocking these items reduces average downtime from 1.6 days to under four hours, according to distributor service logs.
Final Word
Graco Ultra Max II 1095 sprayer parts list is more than a catalogue—it is the blueprint for keeping one of the industry’s most reliable high-output sprayers performing like new. By sticking with genuine Chromex rods, SmartControl sensors, and OEM packings, contractors protect pressure stability, extend pump life, and keep warranties intact. Whether you spray 200 gallons a week on big-box tilt-ups or only break the 1095 out for arena seating decks, mastering the parts list ensures every pull of the trigger is profitable.